Unimark XP Manuel d'utilisateur Page 12
- Page / 23
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Page 12 of 23
1. Configure the 1600 printer with these settings:
1. At the front of the printer, press the Ready/Wait button on the panel until Ready light turns off.
The LCD panel will read Waiting/Idle and the Check Display light will be flashing.
2. Press the Menu button. Press the Next button until ‘Menu Setup’ is displayed on the panel. Press
the select button.
3. Press the Next button until ‘SETUP INTERFACE’ is displayed. Press the Select button.
‘INTERFACE INPUT PORT’ will display. Press Select.
4. Press the Next button until ‘INPUT PORT 25 PIN RS-232’ is displayed. Press Select. ‘INPUT
PORT 25 PIN RS-232 BUFFER SIZE’ will display, press Select.
5. Press the Next button until’ BUFFER SIZE 256’ displays and press Select. Press Next, ‘25 PIN
RS-232 BAUD RATE’ displays. Press Select.
6. Press Next until ‘BAUD RATE 9600’ shows and press Select. Press Next, ‘25 PIN RS-232 DATA
BITS’ displays, press Select. Press Next to ‘DATA BITS 8’ displays and then press Select.
7. Press the Next button until ‘25 PIN RS-232 PARITY’ displays, press Select. Press next until
‘PARITY NONE’ displays and press Select.
8. Press the Next button until‘25 PIN RS-232 DC1/DC3’ displays, press Select. Press Next to
‘DC1/DC3 OFF’ and Press Select.
9. Press the Next button until ‘25 PIN RS-232 PIN 11’ displays, press Select. Press Next to ‘PIN 11
ON’ and press Select.
10. Press the Next button until ‘25 PIN RS-232 DTR’ displays, press Select. Press Next to ‘DTR
HIGH ALWAYS’ and press Select.
11. Press the Menu button until ‘SETUP INTERFACE’ displays. Press Next until ‘SETUP MISC’
displays and press Select.
12. Press Next until ‘MISC AUTO LF on CR’ displays and press Select. Press Next to ‘No’ and press
Select.
13. Press Next until ‘MISC AUTO CR on LF’ displays and press Select. Press Next to ‘No’ and press
Select.
14. Press Menu until ‘Save to disk?’ displays. Press Next To ‘Yes’ and press Select.
15. Wait until it finishes saving and MENU SETUP displays on the LCD panel, then press the
Ready/Wait button so the Ready light comes on.
G. Genicom 930 installation and configuration
Entering the menu:
Produits connexes et manuels pour Imprimer et scanner Unimark XP
(9 pages)Miller Electric 333 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla System spawalniczy Miller Electric 333.
Dostarczamy 3 pdf podręczników Miller Electric 333 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika, Instrukcja Właściciela
Commentaires sur ces manuels