Unimark ET6000 Guide de dépannage télécharger pdf (Page 39)

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer

2.4 Maintenance

2.4.1 Cleaning the Thermal Print Head

To clean the 8500’s print head, complete the following steps:

12 Press ENTER. Press the Down Arrow key until the following message appears:

MAINTENANCE

PRINT HEAD CALIBRATE

13 Press ENTER. Press the Up Arrow twice to get the following message:

CALIBRATE PRINT HEAD

(Exit=no) (Enter=yes)

14 Press ENTER. The following message will flash:

FUNCTION COMPLETED

15 Press EXIT three times.

16 Press ENTER.

17 Press EXIT.

18 Press ONLINE to switch the printer online.

Step Action

1 Power off the unit. Unplug the unit’s AC power cable from the power source.

2 Open the printer’s cover by pressing the cover release button.

3 After the cover pops open, lift the cover to the full upright position.

4 Press the print head release latch downward to open the print head assembly.

Step Action (Continued)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Pas de commentaire

Unimark ET6000 Guide de dépannage Page 39