Unimark ET6000 Guide de dépannage télécharger pdf (Page 54)

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer

2.5 Alarms

The 8500 printer’s alarms are displayed in two formats: Operator and Maintenance.

• Operator alarms are automatically displayed

• Maintenance alarms must be queried by a technician

When an alarm occurs, the printer automatically goes offline and illuminates an alarm LED. The control

panel message displays the activated alarm and a brief corrective action message.

2.5.1 Clearing an Alarm

The 8500 printer has two alarm-clearing mechanisms. The stock-load procedure performs an alarm clear

sequence, and the RESET button clears alarms. When clearing a stock jam, complete the following steps:

2 Lift out the filter guard located at the back of the printer.

3 Remove the filter.

4 Clean the filter using a vacuum cleaner or canned air.

5 Replace the filter and filter guard.

6 Turn on the power to the printer.

Step Action

1 Open the printer’s cover.

2 Examine the paper path and remove any jammed stock. Open and inspect the print head.

3 Close the print head (if opened) and the printer’s cover.

4Press RESET.

Step Action (Continued)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Pas de commentaire

Unimark ET6000 Guide de dépannage Page 54